Help Center
< All Topics

General settings

eSense Pulse Connection
Select the eSense Pulse you want to connect. You must perform this step before you can perform a measurement. With the connection test, you can test the connection and see the battery status.

Feedback direction
Select the direction in which you want the feedback to react to. It can respond either to an increase or decrease in the measured values.

Response time
The default setting is “Short,” which allows feedback to respond quickly to changes in readings. For longer measurements, we recommend “Medium” or “Long,” then the reaction time will be slightly delayed and the eSense will no longer react to every small change in the measured values.

Music Feedback
If the value moves in the unwanted direction (e.g. lower values), the music will become quieter or change its speed depending on the type of feedback you choose.

Music preview
Tap the Play button to listen to the selected song.

Choose Music
You can use the default or your own music.

Music feedback type
You can optionally choose between music start/stop, volume feedback or playback rate feedback. Note: For iOS are the options restricted.

Tone Feedback
In the background, you can hear sounds from other apps.

Choose tone type
You can choose between single or continuous tones.

Tactile Feedback
Your device will vibrate to provide feedback. Only smartphones support this feature, tablets do not have a vibration motor.

Tactile feedback direction
Decide whether decreasing (“Decrease”) or increasing (“Increase”) tactile feedback values should be considered a success.

Smart bulb feedback
The light bulb changes its color depending on the values.

Choose a bulb
Choose between Magic Blue, Magic Blue V2 or Phillips Hue.Connection test
With this option, the bulb changes color if the connection is successful.

Breath Pacer
If activated, a breathing aid is displayed during the measurement.

Use eSense Respiration
You can also measure your breathing at the same time as the eSense Respiration.

Breath pacer type
You can choose between line and sphere.

Enable audio tone
Tones can also be added as auditory breathing aids.

Inhale time / exhale time
Select the seconds for each inhalation breath and exhalation breath to display the breathing aid.
Hold before inhale / exhale
Select the seconds between inhalation and exhalation breaths.

background image
You can choose a background image for the breathing aid.

Inhale color / exhale color
Select the color for each inhalation and exhalation stroke of the bar or ball.

Video
Choice: In the dropdown menu, you can select from included videos and “Select your own video”. You can select your own videos from your device.

Video Feedback Type
Effects can be applied to the video as feedback. Sie können zwischen Start/Stop, Schärfe, Helligkeit und Sättigung wählen. You can choose between Start/Stop, Sharpness, Brightness and Saturation. In addition, the automatic or manual mode for selecting the upper and lower limits is then available for sharpness, brightness, and saturation. In between is then interpolated. “No feedback” is also possible, then the video is simply played.

General:

Session name
Enter the name of your session which will be displayed in the archive here.

Session time length
You can automatically time-limit normal measurements. They stop automatically after the set time.

Time length X-Axis
You can set the time displayed on the X-axis of the oscilloscope. We recommend 90 seconds.

Decimal separator
You can choose between comma or dot.

Survey after recording
Here you can activate/deactivate the survey (position, electrode type, mood, notes) after each measurement.

Markers
You can define markers by tapping the button. These are the markers you can set during a measurement. (See also ‘Set Marker’ in Landscape mode of the general view above).

Show tutorial
You can watch the tutorial again at any time from the first start of the app.

FFT resolution
Selectable are 128 samples, 256 and 512. By default, 256 is selected. The eSense Pulse has a 5 Hz sample rate, so 256 samples are about 52 seconds of data.

Window function for FFT
You can choose between Welch and Hanning, two common window functions, see Wikipedia for more details.

Chart settings
You can change the colors of the graph and the oscilloscope in the general view.

Chart axis color
You can change the color of the chart axis in the main view.

Chart line color
You can change the color of the chart line in the main view.

Oscilloscope background 1&2
You can change the background color of the oscilloscope in the main view.

Smoothing of oscilloscope curve
You can adjust the smoothing of the curve in the oscilloscope between 1 (hardly) and 10 (very strong).

Reset to standard colors
You can restore the default colors for the graph at any time.

Arrow raise / lower color
You can also disable the arrow in the main view.Show arrow
You can also disable the arrow in the main view.

Backup & Restore
You can export and import your procedures and measurements. More about this in our FAQ

Demo Mode
A saved measurement is played back automatically. A real sensor is not needed.


Real time streaming to eSense Web App
This allows you to stream the data live to the eSense Web App. More information in the Account and Cloud section.

Back Explanation of the individual measured values
More In App Purchases
Questions

Leave a Question

Your email address will not be published. Required fields are marked *